1. Clean all of your windows that will be getting tinted.


2. Spray solution (99% water 1% baby soap) onto the clean window that will be getting tinted.

3. Pull off each tint shape off of the liner and spray the same solution onto the back adhesive side.

4. Apply the tint film shapes to the windows and wiggle them into place.


5. When you are happy with the position of the tint film pattern, squeegee out all of the solution that is between the glass and the tint film.

6. Make sure you first squeegee from the center of the tint pattern and work your way out by pulling the solution out to every edge.


7. Once you are done with applying all of your tint film patterns, allow up to 48 hours for the adhesive to fully dry.